| Lidding machines or tray sealers are used to seal a plastic film to the top of a tray. The seal is capable of containing liquid within the tray. Lidding machines have become very popular for creating packaging in the "ready to eat meals" category at supermarket deli's. The TSM-202 and TSM-203 are smaller entry level machines. The TSM-104 is pneumatically operated and die cut around the film. |
| We no longer carry the TSM machines from Minipack | |||||
|
|
||||
|
Max. Tray Size = 7-1/2" x 10" X 5.5" Deep Footprint = 11-1/2" x 17-3/4" x 22" Stock Impression Plate = Adjustable for 5" x 6.5" and 6.75" x 8.75" trays Power = 115 Volt/60/1 phase 20 Amp |
Features: Comes with one stock impression plate Can Use Perforated Printed Film Digital Controls Changeable Impression Plate Adjustable Heat Control Semi-Automatic Operation Small Compact Design Centering Guides For Film Sheets Easy Film Load |
Shipping Weight 60 pounds
F.O.B. Orange, California List Price |
DCE Price You can change to a custom impression plate under options. |
||
|
OPTIONS We will need 50-60 sample trays to manufacture a custom impression plate. Lead time is three to six weeks. |
|||||
|
Custom Impression Plate Replaces stock impression plate. For trays that do not fit the stock plate DCE Price |
Additional Impression Plates Different size trays. For trays that do not fit the stock plate DCE Price |
||||
| The TSM-202 is a semi-automatic tray sealing machine. The trays are placed in the mold. The film is advanced over the tray by pushing in the mold plate in by hand. The lid is lowered automatically to seal the film to the top of the tray. The film is cut-off only in the rear of the tray and leaves a square film around the tray. The film is not trimmed or die-cut around the tray. The normal cycle time is 3-5 seconds. The TSM-202 is 115 volts and does not require external air. The usable impression plate dimension is 7.5" x 10" x 5.5", meaning this is the largest size tray that will fit into an impression plate. Video of TSM-202 in operation using two different stock tray sizes. | |||||
| TSM-203 FROM minipack®-america | |||||
|
|
||||
|
Max. Tray Size = 11" x 14" X 5.5" Deep Footprint = 18" x 19-1/4" x 22" Stock Impression Plate = Two impression plate for two 6.75" x 8.75" trays Power = 115 Volt/60/1 phase 20 Amp |
Features: Comes with one stock impression plate that holds 2 trays Can Use Perforated Printed Film Digital Controls Changeable Impression Plate Adjustable Heat Control Semi-Automatic Operation Small Compact Design Centering Guides For Film Sheets Easy Film Load |
Shipping Weight 100 pounds
F.O.B. Orange, California List Price |
DCE Price You can change to a custom impression plate under options. |
||
|
OPTIONS We will need 50-60 sample trays to manufacture a custom impression plate. Lead time is three to six weeks. |
|||||
|
Custom Impression Plate Replaces stock impression plate. For trays that do not fit the stock plate DCE Price |
Additional Impression Plates Different size trays. For trays that do not fit the stock plate DCE Price |
||||
| The TSM-203 is a semi-automatic tray sealing machine that can hold two trays at one time or a larger tray than the other machines in this series. When using two trays simply use two rolls of film so that each tray has it's own film so the width comes out correct. The trays are placed in the mold. The film is advanced over the tray by pushing in the mold plate in by hand. The lid is lowered automatically to seal the film to the top of the tray. The film is cut-off only in the rear of the tray and leaves a square film around the tray. The film is not trimmed or die-cut around the tray. The normal cycle time is 3-5 seconds. The TSM-203 is 115 volts and does not require external air. The usable impression plate dimension is 11" x 14" x 5.5", meaning this is the largest size tray that will fit into an impression plate. | |||||
