MVS-160 and MVS-170 - New smaller swing lid double chamber vacuum machines.

Minipack now offerstwo smaller Recessed Swing Lid Double Chamber Vacuum Machines. The sizes are all specified below. These two Minipack Swing Lid machines share the following features:

Aluminum Lid with Sightglass	Light, sturdy and includes product visibility
9 Digital Programs	Nine storable programs for different products, liquids, solids, gas, etc.
Digital Vacuum Sensor	Measures & compares the programmed vacuum percent for accuracy
Moisture Quick Stop	Stops vacuum instantly and seals pouch for liquid products
Toolless Trouble Shooting	Digitally test components through control board without tools
Service Indicator	Digital display will display OIL when service is due
Extra Vac	Runs evacuation up to 30 sec. longer for porous or soft products
Horizontal Lid Springs	Ergonomically designed to reduce weight and operator fatigue
Soft Air	Controls the air return rate for delicate or sharp products
Pump Conditioning	Removes and eliminates moisture deposits in oil
Stainless Steel Construction	Premium 304 stainless steel materials and robust construction
Quick Change Seal Bars	1 bolt removal system for easy access
Top & Bottom Seal	Available as a special order option on most MVS model machines
All the MVS Swing-Lid machines feature genuine Busch® vacuum pumps. Each seal bar is powered independently using a dedicated transformer. All swing-lid machines come standard with 2 seal bars per chamber. When one side is finished vacuuming and sealing the packages you simply swing the lid to the other side to start a new cycle. This is approximately 30% faster than using a single chamber machine. We have six other double chamber models available. We have vacuum pouches for these and other vacuum machines that use them.

MVS-160
MVS-160 double chamber swing lid vacuum machine

MVS 160 SWING LID Double Chamber Vacuum Machine

2 Lid Mounted Seal Bars: 17.75"
Position of Seal Bars: Front & Back
Chamber Size: 18.5" x 27"
Height (Chamber+Lid=Total: 5"+4"=9"
Distance Between Seal Bars: 23"
Working Height: 35"
Size: 42"W x 36.5"D x 48"/41"H (lid open/closed)
Vacuum Pump: Busch 75m³/H @ 208 Volt/60/3 phase
3 HP, 18 Amps
Net Weight: 584 Lbs.

Features:
Digital Controls w/ 9 programs
Digital Vacuum Sensor
Aluminum Lid w/Soightglass
5mm Seal + cut-off
Stainless Steel Construction
Recessed Working Deck
Ergonomic lid
Removable Seal Bars
Adjustable Soft Air

Shipping Weight

635 pounds
F.O.B. Orange, CA
LIST PRICE
~~$10,995.00~~

DCE Price
$9,896.00

Order Info

* Must choose one

MVS Options Explained

The Minipack MVS-160 Recessed Swing-Lid Double Chamber Vacuum Machine has two 18.5" x 27" x 5" deep chambers and 1 swing lid with 2 lid mounted seal bars 17.75" long. The lid gives you another 4.5" of product height. The chamber is coupled with a 3 HP 75m³/H Busch® vacuum pump to make quick work of all your vacuum packaging needs. Several options are available. Top and bottom sealing is a special order option on most MVS chamber machines for sealing through thicker or gussetted pouches. We have a spec sheet for the MVS-160.

Take 12% off vacuum pouches ordered with machine!

12% off single case price on the following pouches: 3 mil std. barrier, 4 mil std. barrier, 3 mil boilable, 3 mil high barrier, 3 mil safe handling, 3 mil zipper. Order your pouches at the regular price; we will recalculate your price with the 12% discount. Does not apply to closeout pouches.

MVS-170
MVS-170 recessed deck swing lid chamber vacuum

MVS 170 SWING LID Double Chamber Vacuum Machine

2 Lid Mounted Seal Bars: 22.5"
Position of Seal Bars: Front & Back
Chamber Size: 28.5" x 32.25"
Height (Chamber+Lid=Total: 5"+4"=9"
Distance Between Seal Bars: 28"
Working Height: 35"
Size: 49.5"W x 42"D x 48"/41"H (lid open/closed)
Vacuum Pump: Busch 120m³/H @ 208 Volt/60/3 phase
5 HP, 23 Amps
Net Weight: 734 Lbs.

Shipping Weight

792 pounds
F.O.B. Orange, CA
LIST PRICE
~~$12,995.00~~

DCE Price
$11,696.00

Order Info

* Must choose one

MVS Options Explained

The Minipack MVS-170 Recessed Swing Lid Double Chamber Vacuum Machine has two 22.5" x 32.25" x 5" deep chambers and 1 swing lid with 2 lid mounted seal bars 22" long. The lid gives you another 4.5" of product height. The chamber is coupled with a 5 HP 100m³/H Busch® vacuum pump to make quick work of all your vacuum packaging needs. Several options are available. Top and bottom sealing is a special order option on most MVS chamber machines for sealing through thicker or gussetted pouches. We have a spec sheet for the MVS-170.

Take 12% off vacuum pouches ordered with machine!