FRM1120AL/M Heavy Duty Vertical Band Sealer, right to left operation Spec Sheet for additional special order heavy duty models.
FRMC-980III Horizontal Band Sealer, right to left operation With Vacuum to pull air from bag before sealing. FRMQ-980III Horizontal Band Sealer, right to left operation With Aeration to add air to bag before sealing.
AIE-B7209 Horizontal Band Sealer, left to right operation With Vacuum to pull air from bag before sealing.
Seal bags, pouches, etc. with greater speed and output!
Continuous band sealers are ideal for sealing plastic bags of virtually any size and length. The built in adjustable speed conveyor belt carries the loaded bag through the sealer. The bags lay flat on the conveyor with the horizontal models. With vertical band sealers bags are sealed in a "standing position" which is ideal for packaging bags containing spillable items such as powders, liquids, grains, etc. These sealers consist of a frame, on/off switch, speed regulator, cooling fan, electronic temperature controller, drive & adjustable conveyor and sealing & optional embossing printing wheel. The PTFE Non Stick sealing bands, drive belts and conveyor belt are controlled by one motor. When the on/off switch is turned on, the temperature controller begins heating the sealing blocks. The temperature setting and the speed setting will depend on the type and thickness of material being sealed. The bag will pass through the sealing blocks, cooling blocks and embossing wheel before being dropped out the end sealed. Continuous band sealers are available with right to left or left to right operation.
Band sealers are easy to operate: Turn on the power & fan and set the temperature on the temperature controller. When the preset temperature has been reached, place the bag at the positioning plate bag guide. The sealing bands carry the bag through the unit to seal the bag. Sealed bag is released at end of sealer. No pushing or pulling is required.